Making Physiology Happen

Products

PO2-100U Pulse Oximeter and Plethysmography Sensor

The PO2-100U Pulse Oximeter and Plethysmograph Sensor measures blood oxygen saturation (SpO2) and pulse pressure (plethysmography) using a non-invasive, dual-wavelength light transmittance based finger clip.

The PO2-100U connects to the USB bus of a Windows-based PC or Macintosh computer. It is controlled and data is recorded through built-in iWorx LabScribe  Recording Software.

The PO2-100U is intended for investigational use.

Software:

LabScribe data acquisition and analysis software is included.

iWorx PO2-100U Specifications
Oxygen Saturation Range 80 to 100%
Pulse Rate Range 18 – 300 BPM
Measurement Wavelength Red – 660 nanometers Infrared – 925 nanometers
Accuracy SpO2 70 – 100% + 1 SD
Temperature
  Operating 0 – +50 degrees C
  Non-operating -30 – +50 degrees C
Humidity
   Operating 10 – 90% non-condensing
   Non-operating -30 – +50 degrees C
Power
Power Draw 60 mW – typical operating
Voltage Output 2 – 6 VDC – typical operating
Output Digital Signals 0 – 5 V (nominal)
Patient Isolation Dielectric Withstand Meets IEC 60601-1
Leakage Current not applicable
Dimensions
Finger Pick-up 1.26 in. x 1.25 in. x 2 in. (32 mm x 32 mm x 51 mm)
Box 2.27 in. x 2.4 in. x 1.0 in. 57 mm x 61 mm x 25 mm)


Part Number: PO2-100U