Products
iWire-PO2-100 Pulse Oximeter
Description
The iWire-PO2-100 Pulse Oximeter and Plethysmograph Sensor measures blood oxygen saturation (SpO2) and pulse pressure (plethysmography) using a dual-wavelength light transmittance based finger clip.
The iWire-PO2-100 is intended for use with iWorx Data Acquisition Systems that have an iWire port.
The iWire-PO2-100 is designed for educational use and includes well documented and illustrated lab exercises. (note: the iWire-PO2-100 is not to be used for medical diagnostics).
Specifications
| iWire-PO2-100 Specifications | |
| Oxygen Saturation Range | 80 to 100% |
| Pulse Rate Range | 18 – 300 BPM |
| Measurement Wavelength | Red – 660 nanometers Infrared – 925 nanometers |
| Accuracy | SpO2 80 – 100% + 1 SD |
| Temperature | |
| Operating | 0 – +50 degrees C |
| Non-operating | -30 – +50 degrees C |
| Humidity | |
| Operating | 10 – 90% non-condensing |
| Non-operating | -30 – +50 degrees C |
| Power Draw | 60 mW – typical operating |
| Patient Isolation Dielectric Withstand | Meets IEC 60601-1 |
| Leakage Current | not applicable |
| Dimensions | |
| Finger Pick-up | 1.26 in. x 1.25 in. x 2 in. (32 mm x 32 mm x 51 mm) |
Part Number: iWire-PO2-100
Manual: iWire-PO2-100
